HITWAY BK5 Originalbetriebsanleitung Seite 64

Adjust the angle of the folding handle,follow the
direction shown,squeeze the folding handle of the
frame.
Note: If the folding handle of the frame cannot be
pressed tightly or too tightly, please adjust the
screw at "1" appropriately
Install the handlebar
Adjust the folding tube
Stand up and close the folded
riser in the direction of
the arrow in the picture.
Press down the folding
wrench in the direction of
the arrow in the figure, lock
the folding riser.
1. Open the foldable riser telescopic adjustment
buckle.
2. Insert the telescopic vertical pipe in the same
direction, adjust the required suitable height, and
tighten the adjusting buckle.
Note: If the adjustment buckle is too tight or too
loose, please adjust the screw at "3" appropriately.
Deutsch / English / Français / Español / Italiano / Nederlands / Polski
After confirming that the
quick release slotting is
inserted, lift the lever and
wrench in the direction of
the arrow in the picture.
Note: If the folding
wrench is too tight
or too loose, please
adjust the screw at
"1" appropriately.
(62)
1