ACD GRUPPE M2Smart HMI10 Wired Projektierungshandbuch Seite 43

18.3.3.1 Safety Network Notices
ACD offers products and solutions with industrial safety functions that support the safe operation of plants,
systems, machines and networks.
To secure plants, systems, machines and networks against cyber threats, it is necessary to implement (and
continuously maintain) an end-to-end industrial security concept that reflects the current state of the art.
ACD's products and solutions support one element of such a concept.
Customers are responsible for preventing unauthorized persons from accessing their equipment, systems,
machines and networks. These systems, machines and components should only be connected to the
corporate network or the Internet if and when necessary and only if appropriate protective measures (e.g.,
firewalls and/or network segmentation) have been taken.
ACD's products and solutions are constantly evolving to make them even more secure. ACD strongly
recommends applying product updates as soon as they are available and always using only the latest
product versions. Using outdated or unsupported versions can increase the risk of cyber threats.
18.3.3.2 General Safety Instructions
Only ACD original parts may be used for the operation of the M2Smart
To avoid overheating, the M2Smart
The battery of the M2Smart
Lithium-ion rechargeable batteries can explode if they are subjected to fire or heat. Always observe all
warnings of the M2Smart
Do not set the M2Smart
direct sunlight, excess quantities of dust or shocks. Make sure there are no tripping hazards due to the
connection cable.
The maximum permissible ambient temperatures for the M2Smart
Operating temperature:
Storage temperature:
Bedien-Projektierungshandbuch _M2Smart
®
HMI10 Wired must not be covered during operation.
®
HMI10 Wired used for the system update is mostly a lithium ion battery pack.
®
HMI10 Wired you are using.
®
HMI10 Wired near heat sources (heater blowers, etc.) and never expose it to
-20 °C to 50 °C (applies to the M2Smart
-20 °C to 60 °C (applies to the M2Smart
®
HMI10 Wired_V1.10_de_en
®
HMI10 Wired!
®
HMI10 Wired are listed below.
®
HMI10 Wired)
®
HMI10 Wired)
43 / 71