Stiga SPR 276 Gebrauchsanweisung Seite 206

PROBLEM
8. The machine starts
to vibrate abnormally
9. The machine has
struck a foreign body.
If problems persist after having performed the above operations, contact your Authorised Service Centre.
16. ATTACHMENTS
The "Correct bar and chain combination
table" contains a list of all possible
combinations between bar and chain,
indicating those which may be used on each
machine, marked with the symbol "".
The same table also provides the
specification data for all chains and bars
approved for use on each machine.
Only use the replacement bars
and chains listed in the table. The use
of unapproved combinations may be
hazardous and cause serious injuries to
operators and damage the machine.
In consideration that the selection,
application and use of the bar and chain
are actions made solely by the user, at
his own discretion, the latter assumes
responsibility for damages of any kind
arising from such actions. When in doubt
or if lacking knowledge of the specifics
of each bar or chain, contact your dealer
or an Autorised Service Centre.
PROBABLE CAUSE
Damaged or loose parts.
Damaged or loose parts.
Stop the machine and disconnect
the spark plug cable (Fig. 31.A).
Inspect for damage.
Check and tighten any loose parts.
Have all checks, repair work and
replacements carried out by an
Autorised Service Centre or dealer only.
Stop the machine and disconnect
the spark plug cable (Fig. 31.A).
Inspect for damage.
Check and tighten any loose parts.
Have all checks, repair work and
replacements carried out by an
Autorised Service Centre or dealer only.
EN - 21
REMEDY