Stiga SPR 276 Gebrauchsanweisung Seite 204

• Non-genuine spare parts and attachments
are not approved. Use of non-genuine
spare parts and attachments cause
the warranty to be invalidated.
• It is advisable to send your machine
once a year to an Authorised Service
Centre for servicing, assistance
and safety device inspection.
12. WARRANTY COVERAGE
The warranty covers all material and
manufacturing defects. The user must
follow all the instructions provided in
the accompanying documentation.
The warranty does not cover
damages caused by:
13. MAINTENANCE TABLE
Intervention
MACHINE
Check all fasteners
Safety checks/check controls
Check the chain catcher
Check the machine and bar lubrication holes
General cleaning and inspection
Cleaning the chain
Clutch housing bearing greasing
Check the chain brake metal band
Check the chain drive sprocket
Chain maintenance
Bar maintenance
ENGINE
Checking/topping up fuel level
Topping up the chain oil level
General cleaning and inspection
Cleaning the air filter
Cleaning the spark plug
Replace spark plug
* The operation must be carried out by your Dealer or an Authorised Service Centre
• Failure to become familiar with the
documentation accompanying the machine.
• Carelessness.
• Incorrect or prohibited use or assembly.
• Use of non-genuine spare parts.
• Use of attachments not supplied or
approved by the manufacturer.
The warranty does not cover:
• Normal wear and tear of consumables,
such as cutting means, safety bolts.
• Normal wear and tear.
The purchaser is protected by his or her own
national legislation. The purchaser's rights under
the national laws or his or her own country are
not in any way restricted by this warranty.
Frequency
First time And then after
-
-
-
- Before each daily use
-
-
-
-
-
-
-
-
- Whenever refuelling
-
8-10 hours / every season
- 10 hours / every season
- 100 hours / every season
EN - 19
every
Before each use
Before each use
Before each use
After each use
After each use
30 hours
Once a month
Once a month
-
-
Before each use
After each use
Paragraph
7.9
6.2
7.7
7.8
7.5
7.6
7.5 *
8.2 *
8.3 *
8.6, 14
8.7
7.3.
7.4.
7.5
8.1
8.4
8.4