Werbung
Verfügbare Sprachen
Verfügbare Sprachen
This symbol means that this product must not be disposed of with household waste. Properly dispose of the unit according to local laws and regu-
lations. When the unit reaches the end of its useful life, contact the local authorities for information on disposal and recycling, or ask to collect the used
equipment free of charge. Separate collection and recycling of the product at the time of disposal will help conserve natural resources and ensure that the
unit is recycled properly to safeguard human health and the environment.
Type of packaging (if present)
Cardboard boxes and parts
Corrugated fibreboard
Honeycomb paper
Cardboard corner pieces
Bottom paper support
Various metals/cardboard and paper
Plastic bags
Packaging tape
Expanded polyethylene / polyethylene corner pieces
Adhesive protective film
Flexible film
Plastic protective elements
Polystyrene elements
Pallet, wooden boards, wooden crates
Iron brackets, metal staples, stainless steel screws and washers, galva-
nised steel plates
* Check the disposal methods with your local municipality
2.14. TROUBLESHOOTING
Problem
1 – THE CIRCULATION PUMP DOES NOT START (IF CONNECTED): water differential pressure switch alarm
No voltage to the pump unit
No signal from control board
Pump blocked
Pump motor failure
The water mesh filter (mounted by installer) is dirty
2 - COMPRESSOR: IT DOES NOT START
Microprocessor board alarm
No voltage, switch open
Circuit breakers tripped due to overload
No request for cooling on user with correctly entered work set-point
No request for heating on user with correctly entered work set-point
Work set-point too high in cooling mode
Work set-point too high in heating mode
Defective contactors
Compressor electric motor failure
Head of the compressor very hot, internal circuit breaker tripped
H5xxxxx
79
ENVIRONMENTAL LABELLING OF PACKAGING
Directive (EU) 2018/852, (EU) 2018/851 and Italian Leg. Decree 116/2020
Clips
Straps
Classification
PAPER COLLECTION + METAL COLLECTION
RECOMMENDED ACTION
check the electrical connections
check, call in authorised assistance
check and clear as necessary
repair or replace pump
clean the filter
identify alarm and take appropriate action
close the isolator
reset the switches; check the unit at start-up
check and if necessary wait for cooling request
check and if necessary wait for heating request
check and if necessary readjust set-point
check and if necessary readjust set-point
replace the contactor
check for short circuit
wait an hour at least for cooling
EasyPACK ECO - Nias
Destination*
PAPER COLLECTION
PAPER COLLECTION
PAPER COLLECTION
PAPER COLLECTION
PLASTIC COLLECTION
PLASTIC COLLECTION
PLASTIC COLLECTION
PLASTIC COLLECTION
SEPARATE WASTE COLLECTION
METAL COLLECTION
79
Werbung
