Description Of The Parameters - Solarbayer PROMATIC D10 Bedienungsanleitung

CHANGING THE SERVICE SETTINGS
To enter the desired service group, you should select the appropriate parameter group or
subgroup in the menu, then press and hold the navigation button for 4 seconds. On the
display appears the first service parameter of the selected group. Move between the pa-
rameters with turning the button.
To change the parameter value press the button, the value of the parameter begins to
flash, then change it by turning the button. To confirm the selected value press the button
once again.

DESCRIPTION OF THE PARAMETERS

Contents of each parameter is displayed in the following way:
Parameter mark
Default
value
4 s
39
- Service settings are locked
Parameter value
MIN value
MAX value
Parameter description
Service settings manual