Default Settings; Controller Data - Solarbayer PROMATIC D10 Bedienungsanleitung

DEFAULT SETTINGS

This part of the menu allows you to reset the controler setings to the default values or
save/load the user settings. You have the following options:
DEFAULT SETTINGS >
>
>
>
>
Before execution any of given commands, the controller requests the confirmation of the
selected command.
For use of the Menu see chapter »Entering and navigating through the menu«,
page 26.

CONTROLLER DATA

This command displays the data of controller type and software version.
For use of the Menu see chapter »Entering and navigating through the menu«,
page 26.
TIME PROGRAMS
Restores the default time programs.
ALL SETTINGS
Restores all the parameters to default values.
USER SETTINGS
Loads the previous saved user settings.
SAVE USER SETTINGS
Saves the current settings to user settings. All temperature sensors,
which are possibly in an error state (ERR) are reset to status - - -
(sensor not connected).
EXIT
Now select the answer with turning the button and
confirm it with pressing the button.
Controller type
Software version
37 User manual