Solarbayer PROMATIC D10 Bedienungsanleitung Seite 29

Changing the
heating intervals
Adding new
heating intervals
Deleting intervals
The third and the most important ele-
ment on the display is the timeline
with a graphical display of a time pro-
gram for a selected day. Dark fields
represent day temperature heating
intervals day temperature interval, the
rest is heating to the night tempera-
ture interval.
Use the button to move the cursor
(flashing line) along the timeline.
On the screen a time representing the
cursor's position on the timeline is
displayed. When the cursor reaches
daytime temperature interval, the dis-
play shows start and end time of the
interval.
To change the beginning or end of the
time interval, move the cursor inside
the interval. Now press the button and
the cursor will be placed to the begin-
ning of the interval. From there move
it along the timeline.
When you set the preferred time of
the beginning of the time interval, con-
firm it by pressing the button. Now the
cursor will be placed to the end of the
interval. From there move it to the left
or to the right again and confirm the
position by pressing the button.
You can add a new interval by placing a cursor at the preferred
start of the interval and pressing a button. Now use the button to
set the end of the interval and press again. A new daytime tem-
perature time interval has been created.
On a timeline for a selected day, you can set only
three day temperature intervals.
To delete an interval, select it and press the button, then drag the
beginning of the interval all the way to its end, press the button
again. The interval is deleted.
29 User manual