Basic Parameters - Solarbayer PROMATIC D10 Bedienungsanleitung

BASIC PARAMETERS

SETTING THE REQUIRED DAY TEMPERATURE
The required day temperature can be viewed, by selecting:
SETTING THE REQUIRED NIGHT TEMPERATURE
The required night temperature can be viewed, by selecting:
CONTROLLER PARAMETERS >
REQUIRED NIGHT TEMPERATURE
FROST PROTECTION SETTING
If the heating is turned off or it is not needed, the controller turns off the boiler. The boiler
is automatically switched on, if the outdoor temperature drops bellow the setted frost pro-
tection temperature.
Default setting is 2 °C and can be set in span between -20 and 10 °C.
Frost protection can be set by selecting:
CONTROLLER PARAMETERS >
FROST PROTECTION
Required room temperature is by default set to 6 °C and can be changed with
service parameter S1.11.
SUMMER/WINTER SWITCHOVER TEMPERATURE SETTING
The controller has a built-in function, which automatically turns the heating off, if the aver-
age outdoor temperature is higher than the summer/winter switchover temperature.
The heating is turned on again, when the average outdoor temperature drops bellow the
switchover temperature. If the operation mode switch is in position »day temperature«,
the switchover function is deactivated.
Default setting is OFF and can be set in span between 10 and 30 °C, OFF.
User manual
CONTROLLER PARAMETERS >
REQUIRED DAY TEMPERATURE
BASIC PARAMETERS >
BASIC PARAMETERS >
BASIC PARAMETERS >
32