Solarbayer PROMATIC D10 Bedienungsanleitung Seite 30

FACTORY SET TIME PROGRAMS
Program for
room heating
Program for
room heating
Program for
d. h. w. warming
Program for
d. h. w. circulation
Program for protection
against legionella
If the room unit DD2 is connected then the time program for room heating, is
used from the DD2 (factory setting). For the d. h. w. warming however, the
time program from the controller is used. This setting can be changed with
parameter P1.10 on the room unit for room heating and with parameter
S4.12 on the controller for d. h. w. warming.
User manual
Day
MON - FRI
SAT - SUN
Day
MON - FRI
SAT - SUN
Day
MON - FRI
SAT - SUN
Day
MON - FRI
SAT - SUN
Day
FRI
30
Day temperature interval.
05:00 - 07:30
13:30 - 22:00
07:00 - 22:00
Day temperature interval.
06:00 - 22:00
07:00 - 23:00
Heating active
06:00 - 22:00
07:00 - 23:00
D. h. w. circulation active
05:30 - 7:30
15:00 - 22:00
06:30 - 8:30
12:00 - 14:00
16:00 - 23:00
Program active
5:00 - 6:00