Settings Manual; Three Step Setup - Solarbayer PROMATIC D10 Bedienungsanleitung

THREE STEP SETUP

Heating controllers PROMATIC D10, D20 are equipped with an innovative solution setup
of controller in three easy steps.
STEP 1
When the controller is turned on for the first time, the display shows the company logo
and the program version. With turning the button select the required language and con-
firm it with pressing the button for 2 seconds.
STEP 2
In this step the hydraulic scheme is selected and confirmed with pressing the button for 2
seconds. On some hydraulic schemes you can select floor or radiator heating mode.
STEP 3
With the buttons on the controller you should set up the minimal boiler temperature and
the heating curve steepness for the direct and mixing heating circuits (buttons 3, 4 on
page 8 and buttons 3, 4, 5 on page 9).

SETTINGS MANUAL

21
2 s
2 s
User manual