Solarbayer PROMATIC D10 Bedienungsanleitung Seite 19

AUTOMATIC SETTING OF THE REQUIRED NIGHT
You can set the automatic setting of the required night temperature by
turning the night time temperature setting button to the position "AUT".
Required night temperature is automatically set as shown in diagram.
Due to the heat accumulation, the night time room temperature is usually
higher than the required temperature setting. It is important, that the build-
ing is adequately heated even at that time, especially when the outdoor tem-
perature is very low.
SETTING THE REQUIRED D. H. W. TEMPERATURE
You can set the required d. h. w. temperature with this button. The con-
troller is warming the d. h. w. in accordance with the time program.
Temperature of the d. h. w. can be set between 30 and 70 °C. With button you can also
turn the d. h. w. warming OFF or ON.
Working thermostat on the boiler must be set to at least 10 °C higher tem-
perature than the preferred d. h. w. temperature.
TEMPERATURE
19 User manual