Controller Parameters - Solarbayer PROMATIC D10 Bedienungsanleitung

CONTROLLER PARAMETERS

In the group »CONTROLLER PARAMETERS«, the parameters are divided into five
groups:
CONTROLLER PARAMETERS >
RULES FOR PARAMETER SETTINGS AND OVERVIEW
Select the parameter you want to change with the button. In the first row is a brief param-
eter description, in the second row there is a graphical symbol, parameter value and an
icon for setting the parameter (analogue or digital).
graphic symbol
Parameter setting option are:
Setting is made with buttons on the controller.
Setting is made with the navigation button.
By pressing the button, the value of the parameter begins to flash, now you can
change the value and confirm it by pressing the button again.
For use of the Menu see chapter »Entering and navigating through the menu«,
page 26.
>
>
>
>
parameter setting option
setted parameter value
BASIC PARAMETERS
MIXING HEATING CIRCUIT
DIRECT HEATING CIRCUIT
DOMESTIC HOT WATER
HEAT SOURCES
a brief description of the parameter
31 User manual