Spare Parts; Disposal; Information On The Collection Of Used Electrical And Electronic Products - Wilo SiFresh Einbau- Und Betriebsanleitung

en
17

Spare parts

18

Disposal

18.1 Information on the collection of
used electrical and electronic
products
106
Code Fault
603 Sensor source not suit-
ably configured.
The sensor source is not correctly configured. In the context menu there is a link
for configuring the sensor source.
604 Same sensor source not
possible.
The sensor sources are not correctly configured. In the context menu there is a
link for configuring the sensor sources.
606 Sensor source not avail-
able.
The sensor source or the CIF module is not correctly configured. In the context
menu there are links for configuration.
607 Sensor source not suit-
ably configured.
The sensor source is not correctly configured. In the context menu there is a link
for configuring the sensor source.
609 Sensor source not avail-
able.
The sensor source or the CIF module is not correctly configured. In the context
menu there are links for configuration.
646 Sensor source not avail-
able.
The sensor source or the CIF module is not correctly configured. In the context
menu there are links for configuration.
649 Sensor source not avail-
able.
The sensor source or the CIF module is not correctly configured. In the context
menu there are links for configuration.
Table 29: Configuration warnings
Original spare parts may only be obtained from local installers and/or Wilo customer service.
To avoid queries and order errors, please provide all data on the rating plate with every or-
der.
Proper disposal and appropriate recycling of this product prevents damage to the environ-
ment and danger to your personal health.
NOTICE
Disposal in domestic waste is prohibited!
In the European Union this symbol may be included on the product, the
packaging or the accompanying documentation. It means that the elec-
trical and electronic products in question must not be disposed of along
with domestic waste.
Installation and operating instructions • Wilo-SiFresh • Ed.02/2023-08
Cause Remedy
Sensor 1 is not con- Configure source.
nected to correct Select other source.
source. Input not suit-
ably configured.
Sensor sources are Configure a sensor source to
configured to the another source.
same source.
Sensor value 1 is not Insert CIF module.
connected to existing Activate CIF module.
CIF module.
Sensor 2 is not con- Configure source or
nected to correct select another source.
source. Input not suit-
ably configured.
Sensor value 2 is not Insert CIF module.
connected to existing Activate CIF module.
CIF module.
Sensor value is not Insert CIF module.
connected to existing Activate CIF module.
CIF module.
Sensor value 2 is not Insert CIF module.
connected to existing Activate CIF module.
CIF module.