Werbung
Verfügbare Sprachen
Verfügbare Sprachen
en
76
If necessary, press the Context button
language.
The system runs in factory setting when the Initial settings menu is open.
After reinstallations we recommend venting the rotor chamber. For this purpose, activate
"Start venting". A venting routine starts in the background. Other settings can be con-
figured while venting is active.
If you want to activate venting later, select "Start with factory settings" to quit the menu.
Quit the Initial settings menu to open the Home screen on the display and operate it from
the main menu.
Home screen
1
1.1
Cold water circulation - Δp-c
Delivery head setpoint
Normal operation
3
Fig. 13: Home screen
Item
Name
1
Main menu over-
view
1.1
Status area:
Error, warning or
process information
display
2
Title bar
3
Setpoint display
field
4
Setpoint editor
5
Active influences
6
Reset reference
7
Operating data and
measurement area
8
Context menu ref-
erence
Table 8: Home screen
If the Home screen is not displayed, press the
button
for more than one second to open the Home screen.
Installation and operating instructions • Wilo-SiFresh • Ed.02/2023-08
and go to the Language menu to change the
4
5
Explanation
Selection of different main menus
Indicates an on-going process, warning or error message.
Blue: Process or communication status display (CIF module
communication)
Yellow: Warning
Red: Fault
Grey: There are no processes running in the background,
there are no warning or error messages.
Display of currently set application and control mode.
Displays currently configured setpoints.
Yellow frame: You have pressed the operating button to
open the setpoint editor and change the value.
Display of influences on set control mode
Shows the value before having changed it when the set-
point editor is active.
The arrow shows that you can go back to the previous value
with the Back button.
Shows current operating data and measured values.
Offers context-related options in a separate context menu.
icon in the main menu or hold the Back
2
6
Duty point:
7
Q =
5.9 m³/h
H =
6.0 m
Measured values:
T fluid =
19.3 °C
P elec. =
102 W
W elec. =
21.0 kWh
Last complete
system flush before:
22h 53min 37s
8
Further settings
Werbung
