Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
AFTER FINISHING WORK
Before performing inspections or maintenance in the area of the engine, always allow the mower to
cool down. The engine may have a temperature of up to 115 °C and higher. There is a danger of burns!
CLEANING
Mower
Remove all dirt and grass remains from the surface of the mower. For cleaning, use the scraper, hand-broom,
ƒ
soap water and a soft cleaning sponge. Ensure that water does not come into contact with the electrical
parts of the mower, particularly with the devices on the main panel and battery.
For cleaning the surface of the mower, do not use solvents, abrasive cleaning products causing abrasion,
etc. Such cleaning products may damage the plastics and metals of the mower.
Open the hood and remove any remains of leaves or dirt inside the area. For cleaning, use a fine hand-
ƒ
broom or suitable wiping cloth. For cleaning the engine, never use pressurised water. Clean the engine
and its parts according to the instructions contained in the user's manual from the engine's manufacturer.
Grass catcher and ejection chute
Raise an emptied grass catcher to a suitable height and open it.
ƒ
Thoroughly clean out the inside of the grass catcher and the bottom side of the lid from grass clippings and
ƒ
soil. When the grass catcher has a layer of stuck on grass inside it, then the ability of the mower to fill it
declines. Accumulated dirt may also affect the correct function of the full grass catcher sensor.
You can also clean out the grass catcher using a current of water from a hose. Allow the wet grass catcher
ƒ
to dry out.
After removing the grass catcher, you have better access to the internal parts of the ejection chute. Manually
ƒ
remove any stuck on grass and dirt, and wash the inside of the ejection chute using water and a suitable
sponge.
Mowing deck
Clean the exterior parts of the mowing deck.
ƒ
Remove accumulated grass clippings from the inner part of the mowing deck using a scraper.
ƒ
When cleaning the inner parts of the mowing deck with the mowing blades, always use protective gloves.
Do not hit the mowing blades or other parts of the mowing deck with a hammer or similar implement
in an attempt to remove grass/dirt deposits.
In the event of greater soiling, which cannot be removed manually, it is
ƒ
possible to wash the mowing deck under running water or a current of
water. Before washing it, park the mower on a suitable even surface.
On the cover of the mowing deck, there are quick couplers on both
ƒ
sides, into which a hose with an appropriate quick coupler can be
inserted.
Start the engine, engage the mowing deck and flush out the deck
ƒ
with a current of water for 1 to 5 minutes.
When manually washing the mower with water or a current of water from a hose, ensure that the water
does not come into contact with the electrical parts of the mower, particularly with the devices on the
main panel and the electrical system.
Never wash the part of the mower located under the hood using a current of water!
When cleaning the mower, never step on any part of the mowing deck.
139
Werbung
Inhaltsverzeichnis
