Herunterladen Inhalt Inhalt Diese Seite drucken

Einbau Und Betrieb; Einbaulage; Ventil Mit Lösbaren Rohranschlusselementen; Assembly And Operation - GEA VARIVENT Y Originalbetriebsanleitung

Vorschau ausblenden Andere Handbücher für VARIVENT Y:
Inhaltsverzeichnis

Werbung

Einbau und
Betrieb
Darauf achten, dass
– das Ventil spannungslos in das Rohrleitungssystem
eingebaut wird und
– keine Gegenstände
(z. B. Werkzeuge, Schrauben) im System eingeschlos-
sen sind.

Einbaulage

Die Einbaulage des Ventils ist standardmäßig stehend.
Es muss gewährleistet sein, dass Ventilgehäuse, Rohrlei-
tungssystem und Leckageraum sicher leerlaufen kön-
nen.
Ventil mit lösbaren Rohr-
anschlusselementen
GEFAHR
Wenn die Rohrleitungen Flüssigkeiten enthalten, kön-
nen diese beim Öffnen der Rohrleitungen heraussprit-
zen und Menschen verletzen.
Deshalb vor dem Lösen von Rohranschluss- bzw.
Klemmverbindung:
– Rohrleitung entleeren und, wenn nötig, reinigen oder
spülen.
– Rohrabschnitt für das zu montierende Ventil vom
übrigen Leitungssystem abtrennen, um den Wieder-
eintritt von Produkt zu verhindern.
Ventile mit lösbaren Rohranschlusselementen können –
unter Berücksichtigung passender Anschlussarmaturen
– direkt in das Rohrleitungssystem eingebaut werden.
2016-02 · Doppelsitz-Wechselventil Y mit Liftantrieb LB/ Mixproof shuttle valve Y with lifting actuator LB
Assembly and
Operation
Make sure that
– the valve is installed in the pipe system free of stress
and
– no foreign materials
(e. g. tools, bolts) are enclosed in the system.

Installation position

The standard installation position of the valve is
upright. Care must be taken to ensure that the valve
housing, the pipe system and the leakage outlet system
can drain properly.
Valve with detachable
housing connections
DANGER
If liquids are running in the pipe system, they can gush
out when the line is opened and cause injury to people.
Therefore, prior to detaching pipe connection fittings or
hinged connections:
– drain and – if necessary – rinse or clean the pipe.
– disconnect the pipe segment with the valve to be
mounted from the rest of the pipe system to secure the
pipe against incoming product.
Valves with detachable housing connections can be
installed directly into the pipe system, if suitable con-
nection fittings are used.
13

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis