Operation Using The Vario Pedal - Nouvag MD11 Bedienungsanleitung

7.9

Operation using the VARIO pedal

1
1. Key "PUMP":
Pressing the key briefly: switches the pump on or off (see information on display).
Pressing the key longer: increases the pump speed (see information on display).
2. Key "FOR/REV":
Pressing the key briefly: switches the direction of revolution. (see information on display).
3. Treadplate
With the treadplate pedal the motor speed is variably adjusted and the pump is activated.
Treadplate...
... not pressed
... pressed gently
... pressed all the way down
For safety reasons, the unit can only be operated by pedal.
20
Motor:
Motor off
Motor runs slowly
Motor runs at maximum speed
(speed as set on the control unit)
MD 11, V2.0, Operating Instructions, REF 31665, V22/17
2
3
Pump:
Pump off
Pump on, if pump "On" displayed
(speed as set on the control unit)
Pump on, if pump "On" displayed
(speed as set on the control unit)
MD 11