Operation Using The Vario Pedal - Nouvag HighSurg 11 Bedienungsanleitung

HighSurg 11
7.7

Operation using the Vario pedal

1
1. "PUMP" key:
Pressing the key briefly: switches the pump on or off (check display).
Pressing the key longer: increases the pump speed (check display).
2. "FOR/REV" key:
Changing the rotational direction of the motor (check arrow on the display).
3. Treadplate
With the treadplate pedal the motor speed is variably adjusted and the pump is activated.
Treadplate...
... not pressed
... pressed gently
... pressed all the way down
For safety reasons, the unit can only be operated by pedal.
HighSurg 11, Operating Instructions, Ref. 31998, V14/15
Motor:
Motor off
Motor runs slowly
Motor runs at maximum speed
(speed as set on the control unit)
2
3
Pump:
Pump off
Pump on, if pump "On" displayed
(speed as set on the control unit)
Pump on, if pump "On" displayed
(speed as set on the control unit)
EN
15