Abiomed Impella 5.0 Gebrauchsanweisung Seite 9

STARTUP
SUPPLIES NEEDED
• Automated Impella ® Controller
• Impella 5.0 Catheter and accessories
®
• Diagnostic catheter (AL1 or MP without side holes or pigtail without side holes)
• 500 cc bag of dextrose solution for purge solution (5% recommended; 5% to 40% acceptable) with 50 IU
heparin/mL
• 10 mm x 20 cm Dacron vascular graft (if using Axillary Insertion kit; Hemashield Platinum graft
recommended)
• 8 mm x 20 cm Dacron vascular graft (optional for femoral insertion of Impella® 5.0)
Impella ® 5.0 Circulatory Support System
The 0.018 inch, 260 cm guidewire is used for the placement of the Impella
Catheter only.
The Impella ® Axillary Insertion kit facilitates placement of the Impella
5.0, or Impella CP ® Catheter via the axillary artery. It contains a 23 Fr diameter
x 6 cm length peel-away introducer and two (2) graft locks used to attach a
graft onto the introducer. (Note: Only one graft lock is required when used with
the recommended Hemashield Platinum graft; a back-up is provided.) The kit is
packaged with an 8 Fr silicone-coated lubrication dilator. It is recommended to be
used in conjunction with a 10 mm diameter x 20 cm length Hemashield Platinum
graft.
Hospital Provided:
Dextrose solution (typically 5% dextrose in water with 50 IU/mL of heparin) is used
as the purge fluid through the Impella
®
The Automated Impella Controller cart holds the Automated Impella
®
The cart has wheels for easy transport of the controller and a storage basket. (For
more information, including assembly instructions, refer to the Automated Impella
Controller cart instructions for use.)
5.0
®
® 2.5,
5.0 Catheter.
Controller.
®
®
7