Inhaltsverzeichnis
Werbung
R&S FSL
Grundeinstellungen für Messungen
REM ************************************************************************
Public Sub SetupInstrument()
'––––––––– Default setting of the R&S FSL –––––––––––––––––––––––––––––––––
CALL SetupStatusReg
CALL InstrWrite(analyzer,"*RST")
CALL InstrWrite(analyzer,"SYST:DISP:UPD ON")
CALL InstrWrite(analyzer,"DISP:FORM SINGle")
CALL InstrWrite(analyzer,"DISP:WIND1:SEL")
CALL InstrWrite(analyzer,"INIT:CONT OFF")
'––––––––– Frequency setting –––––––––––––––––––––––––––––––––––––––––––––––
CALL InstrWrite(analyzer,"FREQUENCY:CENTER 100MHz")
CALL InstrWrite(analyzer,"FREQ:SPAN 1 MHz")
'––––––––– Level setting –––––––––––––––––––––––––––––––––––––––––––––––––––
CALL InstrWrite(analyzer,"DISP:WIND:TRAC:Y:RLEV –20dBm")
CALL InstrWrite(analyzer,"INP:ATT 10dB")
'––––––––– Level scaling –––––––––––––––––––––––––––––––––––––––––––––––––––
CALL InstrWrite(analyzer,"DISP:WIND:TRAC:Y:SPAC LOG")
CALL InstrWrite(analyzer,"DISP:WIND:TRAC:Y:SCAL 100dB")
CALL InstrWrite(analyzer,"DISP:WIND:TRAC:Y:SCAL:MODE ABS")
CALL InstrWrite(analyzer,"CALC:UNIT:POW DBM")
'––––––––– Trace and detector setting ––––––––––––––––––––––––––––––––––––––
CALL InstrWrite(analyzer,"DISP:TRAC1:MODE AVER")
CALL InstrWrite(analyzer,"AVER:TYPE VID")
CALL InstrWrite(analyzer,"SWE:COUN 10")
CALL InstrWrite(analyzer,"DISP:TRAC2 OFF")
CALL InstrWrite(analyzer,"DISP:TRAC3 OFF")
CALL InstrWrite(analyzer,"DISP:TRAC4 OFF")
CALL InstrWrite(analyzer,"DISP:TRAC5 OFF")
CALL InstrWrite(analyzer,"DISP:TRAC6 OFF")
1300.2519.61
Komplexere Programmbeispiele
'Configure status registers
'Reset instrument
'ON: screen display on
'OFF: off (improved performance)
'Full screen display
'Active Screen A
'Single sweep mode
'Center frequency
'Span
'Reference level
'Input attenuation
'Log level axis
'Level range
'Absolute scaling
'y meas. unit
'Trace1 average
'Average mode video; "LIN" for linear
'Sweep count
'Trace2 blank
'Trace3 blank
'Trace4 blank
'Trace5 blank
'Trace6 blank
6.11
(*)
D-3
Werbung
Inhaltsverzeichnis
