Sntp Client Request-Interval; Sntp Client Broadcast-Rcv-Timeout; Sntp Client Disable-After-Sync - Hirschmann Automation GRS1040 Bedienungsanleitung - Referenz-Handbuch

87.1.3

sntp client request-interval

Set the SNTP client request interval in seconds. \nThe request-interval is only used in the operating-
mode unicast.

Mode: Global Config Mode

Privilege Level: Administrator

Format: sntp client request-interval <P-1>
Paramete Value
r
P-1 5..3600
87.1.4

sntp client broadcast-rcv-timeout

Set the SNTP client broadcast receive timeout in seconds. \nThe broadcast receive timeout is only used
in the operating-mode broadcast.

Mode: Global Config Mode

Privilege Level: Administrator

Format: sntp client broadcast-rcv-timeout <P-1>
Paramete Value
r
128..2048
P-1
87.1.5

sntp client disable-after-sync

If this option is activated, the SNTP client disables itself \nonce it is synchronized to a SNTP server.

Mode: Global Config Mode

Privilege Level: Administrator

Format: sntp client disable-after-sync

no sntp client disable-after-sync
Disable the option

Mode: Global Config Mode

Privilege Level: Administrator

Format: no sntp client disable-after-sync
RM CLI HiOS-3A-MR GRS1040
Release 6.1 09/2016
Meaning
Enter a number in the given range.
Meaning
Enter a number in the given range.
Simple Network Time Protocol (SNTP)
87.1 sntp
757