Hirschmann Automation GRS1040 Bedienungsanleitung - Referenz-Handbuch Seite 1180

67.2.9 inlinepower power-limit
Configure the interface related inline maximum power that is reserved for a connected powered device
(PD). The power limit is ignored if it is set to 0 or it is exceeded by the maximum observed power
consumption.

Mode: Interface Range Mode

Privilege Level: Operator

Format: inlinepower power-limit <P-1>
Paramete Value
r
xxx_0.000..30.000
P-1
RM CLI HiOS-3A-MR GRS1040
Release 6.1 09/2016
Meaning
PoE power limit in watts (e.g. 12.54).
Power Over Ethernet (PoE)
67.2 inlinepower
623