Logging Host Add; Logging Host Delete - Hirschmann Automation GRS1040 Bedienungsanleitung - Referenz-Handbuch

54.1.3

logging host add

Add a new logging host.

Mode: Global Config Mode

Privilege Level: Administrator

Format: logging host add <P-1> addr <P-2> <P-3> [transport <P-4>] [port <P-
5>] [severity <P-6>] [type <P-7>]
addr: Enter the IP address of the server.
[transport]: Configure the type of transport used for syslog server transmission.
[port]: Enter the port used for syslog server transmission.
[severity]: Configure the minimum severity level to be sent to this syslog server.
[type]: Configure the type of log messages to be sent to the syslog server.
Paramete Value
r
1..8
P-1
string
P-2
a.b.c.d
P-3
udp
P-4
tls
1..65535
P-5
emergency
P-6
alert
critical
error
warning
notice
informational
debug
0
1
2
3
4
5
6
7
systemlog
P-7
audittrail
54.1.4

logging host delete

Delete a logging host.

Mode: Global Config Mode

Privilege Level: Administrator

Format: logging host delete <P-1>
Paramete Value
r
1..8
P-1
RM CLI HiOS-3A-MR GRS1040
Release 6.1 09/2016
Meaning
Syslog server entry index
Hostname or IP address.
IP address.
The UDP-based transmission.
The TLS-based transmission.
Port number to be used
System is unusable. System failure has occurred.
Action must be taken immediately. Unrecoverable failure of a
component. System failure likely.
Recoverable failure of a component that may lead to system
failure.
Error conditions. Recoverable failure of a component.
Minor failure, e.g. misconfiguration of a component.
Normal but significant conditions.
Informational messages.
Debug-level messages.
Same as emergency
Same as alert
Same as critical
Same as error
Same as warning
Same as notice
Same as informational
Same as debug
the system event log entries
the audit trail log entries
Meaning
Syslog server entry index
Logging
54.1 logging
507