Radius Server Auth Modify; Radius Server Retransmit - Hirschmann Automation GRS1040 Bedienungsanleitung - Referenz-Handbuch

Radius
73.2 radius
73.2.8

radius server auth modify

Change a RADIUS authentication server parameters.

Mode: Global Config Mode

Privilege Level: Administrator

Format: radius server auth modify <P-1> [name <P-2>] [port <P-3>] [msgauth
<P-4>] [primary <P-5>] [status <P-6>] [secret [<P-7>]] [encrypted <P-8>]
[name]: RADIUS authentication server name.
[port]: RADIUS authentication server port (default: 1812).
[msgauth]: Enable or disable the message authenticator attribute for this server.
[primary]: Configure the primary RADIUS server.
[status]: Enable or disable a RADIUS authentication server entry.
[secret]: Configure the shared secret for the RADIUS authentication server.
[encrypted]: Configure the encrypted shared secret.
Paramete Value
r
P-1 1..8
string
P-2
1..65535
P-3
enable
P-4
disable
enable
P-5
disable
enable
P-6
disable
string
P-7
string
P-8
73.2.9

radius server retransmit

Configure the retransmit value for the RADIUS server.

Mode: Global Config Mode

Privilege Level: Administrator

Format: radius server retransmit <P-1>
Paramete Value
r
1..15
P-1
676
Meaning
RADIUS server index.
Enter a user-defined text, max. 32 characters.
Enter port number between 1 and 65535
Enable the option.
Disable the option.
Enable the option.
Disable the option.
Enable the option.
Disable the option.
Enter a user-defined text, max. 128 characters.
Enter a user-defined text, max. 128 characters.
Meaning
Maximum number of retransmissions (default: 4).
RM CLI HiOS-3A-MR GRS1040
Release 6.1 09/2016