Selftest System-Monitor; Selftest Boot-Default-On-Error - Hirschmann Automation GRS1040 Bedienungsanleitung - Referenz-Handbuch

78.1.3

selftest system-monitor

Enable or disable the System Monitor 1 access during the boot phase. Please note: If the System
Monitor is disabled it is possible to loose access to the device permanently in case of loosing
administrator password or mis-configuration.

Mode: Global Config Mode

Privilege Level: Administrator

Format: selftest system-monitor

no selftest system-monitor
Disable the option

Mode: Global Config Mode

Privilege Level: Administrator

Format: no selftest system-monitor
78.1.4

selftest boot-default-on-error

Enable or disable loading of the default configuration in case there is any error loading the configuration
during boot phase. If disabled the system will be halted.

Mode: Global Config Mode

Privilege Level: Administrator

Format: selftest boot-default-on-error

no selftest boot-default-on-error
Disable the option

Mode: Global Config Mode

Privilege Level: Administrator

Format: no selftest boot-default-on-error
RM CLI HiOS-3A-MR GRS1040
Release 6.1 09/2016
Selftest
78.1 selftest
713