Network Management Access Delete; Network Management Access Modify - Hirschmann Automation GRS1040 Bedienungsanleitung - Referenz-Handbuch

Paramete Value
r
enable
P-5
disable
enable
P-6
disable
enable
P-7
disable
enable
P-8
disable
enable
P-9
disable
enable
P-10
disable
P-11 enable
disable
P-12 enable
disable
57.1.3

network management access delete

Delete an entry with index.

Mode: Privileged Exec Mode

Privilege Level: Administrator

Format: network management access delete <P-1>
Paramete Value
r
1..16
P-1
57.1.4

network management access modify

Modify an entry with index.

Mode: Privileged Exec Mode

Privilege Level: Administrator

Format: network management access modify <P-1> ip <P-2> mask <P-3> http <P-
4> https <P-5> snmp <P-6> telnet <P-7> iec61850-mms <P-8> modbus-tcp <P-9>
ssh <P-10> ethernet-ip <P-11> profinet-io <P-12>
ip: Configure ip-address which should have access to management.
mask: Configure network mask to allow a subnet for management access.
http: Configure if HTTP is allowed to have management access.
https: Configure if HTTPS is allowed to have management access.
snmp: Configure if SNMP is allowed to have management access.
telnet: Configure if TELNET is allowed to have management access.
RM CLI HiOS-3A-MR GRS1040
Release 6.1 09/2016
Meaning
Enable the option.
Disable the option.
Enable the option.
Disable the option.
Enable the option.
Disable the option.
Enable the option.
Disable the option.
Enable the option.
Disable the option.
Enable the option.
Disable the option.
Enable the option.
Disable the option.
Enable the option.
Disable the option.
Meaning
Pool entry index.
Management Access
57.1 network
541