Monitor Session - Hirschmann Automation GRS1040 Bedienungsanleitung - Referenz-Handbuch

Switched Monitoring (SMON)
83.1 monitor
83.1 monitor
Configure port mirroring.
83.1.1

monitor session

Configure port mirroring.

Mode: Global Config Mode

Privilege Level: Operator

Format: monitor session <P-1> destination interface <P-2> remote vlan <P-3>
source interface <P-4> direction <P-5> operation vlan <P-6> remote vlan <P-
7> mode
destination: Configure the probe interface.
interface: Configure interface.
remote: Destination RSPAN configuration.
vlan: Set the destination RSPAN VLAN used to tag the mirrored frames.
source: Configure the source interface.
interface: Configure interface
direction: Select interface.
operation: Enable/disable mirroring on an interface.
vlan: Set the VLAN to mirror.
remote: Source RSPAN configuration.
vlan: Set the source RSPAN VLAN on which mirrored frames are expected.
mode: Enable/Disable port mirroring session. Note: does\nnot affect the source or destination
interfaces.
Paramete Value
r
1
P-1
slot no./port no.
P-2
integer
P-3
slot no./port no.
P-4
none
P-5
tx
rx
txrx
P-6 0..4042
P-7 integer
736
Meaning
Monitor session index.
VLAN Mirror Remote VLAN ID List.
None.
Packets that are transmitted on the source interfaces are copied
to the destination interface.
Packets that are received on the source interfaces are copied
to the destination interface.
Packets that are transmitted or received on the source
interfaces are copied to the destination interface.
Enter the VLAN ID. Entering of ID 0 disables the feature.
VLAN Mirror Remote VLAN ID List.
RM CLI HiOS-3A-MR GRS1040
Release 6.1 09/2016