Signal-Contact Trap - Hirschmann Automation GRS1040 Bedienungsanleitung - Referenz-Handbuch

Signal Contact
81.1 signal-contact

81.1.10 signal-contact trap

Configure if a trap is sent when the Signal Contact\nchanges state (in monitor mode).

Mode: Global Config Mode

Privilege Level: Administrator

Format: signal-contact <P-1> trap
Paramete Value
r
signal contact no.
P-1

no signal-contact trap
Disable the option

Mode: Global Config Mode

Privilege Level: Administrator

Format: no signal-contact <P-1> trap
81.1.11 signal-contact module
Configure the monitoring of the specific module.

Mode: Global Config Mode

Privilege Level: Administrator

Format: signal-contact <P-1> module <P-2>
Paramete Value
r
signal contact no.
P-1
slot no./port no.
P-2

no signal-contact module
Disable the option

Mode: Global Config Mode

Privilege Level: Administrator

Format: no signal-contact <P-1> module <P-2>
728
Meaning
Meaning
RM CLI HiOS-3A-MR GRS1040
Release 6.1 09/2016