Mrp-Ieee Mvrp Restrict-Register - Hirschmann Automation GRS1040 Bedienungsanleitung - Referenz-Handbuch

63.2 mrp-ieee
Configure IEEE MRP parameters and protocols, MVRP for dynamic VLAN registration and MMRP for
dynamic MAC registration on a port.
63.2.1 mrp-ieee mvrp operation
Enable or disable IEEE MVRP on the port. When enabled, globally and on this port, the device
distributes VLAN membership information to MVRP aware devices connected to this port.

Mode: Interface Range Mode

Privilege Level: Operator

Format: mrp-ieee mvrp operation

no mrp-ieee mvrp operation
Disable the option

Mode: Interface Range Mode

Privilege Level: Operator

Format: no mrp-ieee mvrp operation
63.2.2

mrp-ieee mvrp restrict-register

Enable or disable restriction of dynamic VLAN registration using IEEE MVRP on the port. When
enabled, the dynamic registration of VLAN attributes is allowed only if the attribute has already been
statically registered on the device.

Mode: Interface Range Mode

Privilege Level: Operator

Format: mrp-ieee mvrp restrict-register

no mrp-ieee mvrp restrict-register
Disable the option

Mode: Interface Range Mode

Privilege Level: Operator

Format: no mrp-ieee mvrp restrict-register
RM CLI HiOS-3A-MR GRS1040
Release 6.1 09/2016
MRP IEEE MVRP
63.2 mrp-ieee
579