Hirschmann Automation GRS1040 Bedienungsanleitung - Referenz-Handbuch Seite 1007

IP Source Guard (IPSG)
45.4 show
45.4 show
Display device options and settings.
45.4.1 show ip source-guard interfaces
This command shows the IP Source Guard (IPSG) status of all interfaces.

Mode: Command is in all modes available.

Privilege Level: Guest

Format: show ip source-guard interfaces
45.4.2 show ip source-guard bindings
This command displays the IPSG binding entries from the static and/or dynamic bindings table.

Mode: Command is in all modes available.

Privilege Level: Guest

Format: show ip source-guard bindings [<P-1>] [interface <P-2>] [vlan <P-3>]
[interface]: Restrict the output based on a specific interface.
[vlan]: Restrict the output based on VLAN.
Paramete Value
r
static
P-1
dynamic
slot no./port no.
P-2
1..4042
P-3
450
Meaning
Restrict the output based on static bindings.
Restrict the output based on dynamic bindings.
Enter the VLAN ID.
RM CLI HiOS-3A-MR GRS1040
Release 6.1 09/2016