Signal-Contact Mode; Signal-Contact Monitor Link-Failure - Hirschmann Automation GRS1040 Bedienungsanleitung - Referenz-Handbuch

Signal Contact
81.1 signal-contact
81.1 signal-contact
Configure the signal contact settings.
81.1.1

signal-contact mode

Configure the Signal Contact mode setting.

Mode: Global Config Mode

Privilege Level: Administrator

Format: signal-contact <P-1> mode <P-2>
Paramete Value
r
signal contact no.
P-1
manual
P-2
monitor
device-status
security-status
dev-sec-status
81.1.2

signal-contact monitor link-failure

Sets the monitoring of the network connection(s).

Mode: Global Config Mode

Privilege Level: Administrator

Format: signal-contact <P-1> monitor link-failure
Paramete Value
r
signal contact no.
P-1

no signal-contact monitor link-failure
Disable the option

Mode: Global Config Mode

Privilege Level: Administrator

Format: no signal-contact <P-1> monitor link-failure
724
Meaning
The signal contact's status is determined by the\nassociated
manual setting (subcommand 'state').
The signal contact's status is determined by the\nassociated
monitor settings.
The signal contact's status is determined by the\ndevice status.
The signal contact's status is determined by the\nsecurity
status.
The signal contact's status is determined by the\ndevice status
and security status.
Meaning
RM CLI HiOS-3A-MR GRS1040
Release 6.1 09/2016