Port-Monitor Condition Link-Flap Interval; Port-Monitor Condition Link-Flap Count; Port-Monitor Condition Link-Flap Mode - Hirschmann Automation GRS1040 Bedienungsanleitung - Referenz-Handbuch

Port Monitor
68.2 port-monitor

no port-monitor condition crc-fragments mode
Disable the option

Mode: Interface Range Mode

Privilege Level: Operator

Format: no port-monitor condition crc-fragments mode
68.2.4

port-monitor condition link-flap interval

Configure the measure interval in seconds (1-180s) for Link Flap detection. Default 10.

Mode: Interface Range Mode

Privilege Level: Operator

Format: port-monitor condition link-flap interval <P-1>
Paramete Value
r
1..180
P-1
68.2.5

port-monitor condition link-flap count

Configure the Link Flap counter (1-100). Default 5.

Mode: Interface Range Mode

Privilege Level: Operator

Format: port-monitor condition link-flap count <P-1>
Paramete Value
r
1..100
P-1
68.2.6

port-monitor condition link-flap mode

Enable or disable link-flap condition to trigger an action.

Mode: Interface Range Mode

Privilege Level: Operator

Format: port-monitor condition link-flap mode
628
Meaning
Enter a number in the given range.
Meaning
Enter a number in the given range.
RM CLI HiOS-3A-MR GRS1040
Release 6.1 09/2016