Mrp-Ieee Mmrp Restrict-Register - Hirschmann Automation GRS1040 Bedienungsanleitung - Referenz-Handbuch

62.5 mrp-ieee
Configure IEEE MRP parameters and protocols, MVRP for dynamic VLAN registration and MMRP for
dynamic MAC registration on a port.
62.5.1 mrp-ieee mmrp operation
Enable or disable MMRP on the interface, with MMRP enabled globally and on this interface, the device
sends and receives MMRP messages on this port.

Mode: Interface Range Mode

Privilege Level: Operator

Format: mrp-ieee mmrp operation

no mrp-ieee mmrp operation
Disable the option

Mode: Interface Range Mode

Privilege Level: Operator

Format: no mrp-ieee mmrp operation
62.5.2

mrp-ieee mmrp restrict-register

Enable or disable restriction of dynamic mac address registration using IEEE MMRP on the port. When
enabled, the dynamic registration of mac address attributes is allowed only if the attribute has already
been statically registered on the device.

Mode: Interface Range Mode

Privilege Level: Operator

Format: mrp-ieee mmrp restrict-register

no mrp-ieee mmrp restrict-register
Disable the option

Mode: Interface Range Mode

Privilege Level: Operator

Format: no mrp-ieee mmrp restrict-register
RM CLI HiOS-3A-MR GRS1040
Release 6.1 09/2016
MRP IEEE MMRP
62.5 mrp-ieee
575