Profinet Dcp-Mode - Hirschmann Automation GRS1040 Bedienungsanleitung - Referenz-Handbuch

70.2 profinet
Configures the PROFINET functionality on this device.
70.2.1

profinet dcp-mode

Sets the PROFINET DCP mode on an interface.

Mode: Interface Range Mode

Privilege Level: Operator

Format: profinet dcp-mode <P-1>
Paramete Value
r
none
P-1
ingress
egress
both
RM CLI HiOS-3A-MR GRS1040
Release 6.1 09/2016
Meaning
Sets the PROFINET DCP mode on an interface to none (neither
ingress or egress). The agent does not respond to frames
received on this interface. The interface does not forward
frames received on other interfaces.
Sets the PROFINET DCP mode on an interface to ingress only. The
agent responds to frames received on this interface. The
interface does not forward frames received on other interfaces.
Sets the PROFINET DCP mode on an interface to egress only. The
agent does not respond to frames received on this interface. The
interface forwards frames received on other interfaces.
Sets the PROFINET DCP mode on an interface to both (ingress and
egress). The agent responds to frames received on this
interface. The interface forwards frames received on other
interfaces.
Profinet IO
70.2 profinet
647