Port-Monitor Condition Crc-Fragments Interval; Port-Monitor Condition Crc-Fragments Count; Port-Monitor Condition Crc-Fragments Mode - Hirschmann Automation GRS1040 Bedienungsanleitung - Referenz-Handbuch

68.2 port-monitor
Configure the Port Monitor condition settings.
68.2.1

port-monitor condition crc-fragments interval

Configure the measure interval in seconds (5-180s) for CRC-Fragment detection. Default 10.

Mode: Interface Range Mode

Privilege Level: Operator

Format: port-monitor condition crc-fragments interval <P-1>
Paramete Value
r
5..180
P-1
68.2.2

port-monitor condition crc-fragments count

Configure the CRC-Fragment counter in parts per million (1-1000000 [ppm]). Default 1000 [ppm].

Mode: Interface Range Mode

Privilege Level: Operator

Format: port-monitor condition crc-fragments count <P-1>
Paramete Value
r
1..1000000
P-1
68.2.3

port-monitor condition crc-fragments mode

Enable or disable CRC-Fragments condition to trigger an action.

Mode: Interface Range Mode

Privilege Level: Operator

Format: port-monitor condition crc-fragments mode
RM CLI HiOS-3A-MR GRS1040
Release 6.1 09/2016
Meaning
Enter a number in the given range.
Meaning
Enter a number in the given range.
Port Monitor
68.2 port-monitor
627