MRP IEEE
61.1 mrp-ieee
61.1
mrp-ieee
Configure IEEE MRP parameters and protocols, MVRP for dynamic VLAN registration and MMRP for
dynamic MAC registration on a port.
61.1.1
mrp-ieee global join-time
Set the IEEE multiple registration protocol join time-interval. The join timer controls the interval between
join message transmissions sent to applicant state machines. An instance of this timer is required on a
per-Port, per-MRP participant basis.
Mode: Interface Range Mode
Privilege Level: Operator
Format: mrp-ieee global join-time <P-1>
Paramete
Value
r
10..100
P-1
61.1.2
mrp-ieee global leave-time
Set the IEEE multiple registration protocol leave time-interval. The leave timer controls the period of time
that the registrar state machine waits in the leave state before transiting to the empty state. An instance
of the timer is required for each state machine in the leave state.
Mode: Interface Range Mode
Privilege Level: Operator
Format: mrp-ieee global leave-time <P-1>
Paramete
Value
r
20..600
P-1
566
Meaning
Join time-interval in centi-seconds.
Meaning
Leave time-interval in centi-seconds.
RM CLI HiOS-3A-MR GRS1040
Release 6.1 09/2016