Simple Network Time Protocol (SNTP)
87.1 sntp
87.1
sntp
Configure SNTP settings.
87.1.1
sntp client operation
Enable or disable the SNTP client
Mode: Global Config Mode
Privilege Level: Administrator
Format: sntp client operation
no sntp client operation
Disable the option
Mode: Global Config Mode
Privilege Level: Administrator
Format: no sntp client operation
87.1.2
sntp client operating-mode
Set the operating mode of the SNTP client. \nIn unicast-mode, the client sends a request to the SNTP
Server. \nIn broadcast-mode, the client waits for a broadcast message from the SNTP Server.
Mode: Global Config Mode
Privilege Level: Administrator
Format: sntp client operating-mode <P-1>
Paramete
Value
r
unicast
P-1
broadcast
756
Meaning
Set the operating mode to unicast.
Set the operating mode to broadcast.
RM CLI HiOS-3A-MR GRS1040
Release 6.1 09/2016