Changing Direction Of Rotation - Nouvag TCM3000BL Bedienungsanleitung

Available rotary modes
(100 – 400 rpm)
(300 – 700 rpm)
(500 – 1000 rpm)
Activating mode setting
Press to activate mode setting.
The Vario LED lights up.
The Low LED lights up. (Default setting)
The display shows "VARIO LOW, 100 – 400 rpm".
Selecting mode
Press , or
mode.
The display shows the mode and the correspond-
ing speed range that can be selected with the pe-
dal.
The corresponding LED lights up.
Starting motor
Press pedal. The motor LED lights. The blade ro-
tates at a speed within the range set by how far
down the pedal is pressed.
To stop the motor remove foot from pedal.
Exit mode setting
Press .

Changing direction of rotation

To change the direction of rotation, press
The display shows the mode and the correspond-
ing speed range that can be selected with the pe-
dal.
The corresponding LED lights up.
20
to select the corresponding
.
Instrucions for use for TCM 3000 BL - Morcellator, Ref. 31946, V26/16
TCM 3000 BL - Morcellator