Disassembling Trocar Cannula - Nouvag TCM3000BL Bedienungsanleitung

6.4

Disassembling Trocar Cannula

Disassembling Trocar Cannula (four steps)
Disassemble Trocar Cannula before decontami-
nation.
Disassemble Trocar Cannula and rinse in deion-
ized water during disassembly.
1. Unscrew sealing cap holder from the proxi-
mal end of the Trocar Cannula.
2. Remove the internal seal from the sealing
cap holder.
3. Unscrew the valve body from the main body.
4. Remove the red O-ring from the valve body.
28 Instrucions for use for TCM 3000 BL - Morcellator, Ref. 31946, V26/16
TCM 3000 BL - Morcellator