Option 3: Myomectomy - Nouvag TCM3000BL Bedienungsanleitung

6.2.3

Option 3: Myomectomy

The myoma drill has been designed exclusively for removing tissue from a myoma.
1. Inserting Morcellator
Insert Morcellator with protective tube through
the percutaneous access.
Keep gripper ready to remove the tissue from the
myoma drill.
2. Inserting myoma drill
Insert Trocar Cannula through an additional per-
cutaneous access.
Open valve flap of Trocar Cannula and insert my-
oma drill.
3. Uncovering myoma
Remove tissue from the myoma with the myoma
drill.
4. Inserting gripper
Insert gripper through the second access and re-
move separated tissue from the myoma drill.
Remove myoma drill.
5. Removing separated tissue
If the piece of tissue is larger than the diameter of the cutting tube, start the Morcellator set motor.
Pull the tissue towards the rotating blade with the gripper.
(Smaller pieces of tissue can be removed without morcellation)
Carefully pull the complete gripper out of the Morcellator and the patient. The retracted mouth must not
touch the blade of the cutting tube.
6. Removing additional tissue
If necessary, re-insert the myoma drill and repeat the above process.
26 Instrucions for use for TCM 3000 BL - Morcellator, Ref. 31946, V26/16
TCM 3000 BL - Morcellator