Herunterladen Diese Seite drucken

Strapping With Harness System; Allacciare Con Il Sistema Di Cinture - CYBEX Aton B i-Size Kurzanleitung

Werbung

STRAPPING WITH HARNESS SYSTEM

NOTE! Ensure that the headrest is correctly locked in place before
using the car seat.
NOTE! Ensure that the car seat is free from toys and hard objects.
• Loosen shoulder belts (6) by pressing the adjustment button on
central adjuster (7) and simultaneously pulling both shoulder
belts up.
NOTE! Please always pull on shoulder belt (6) and not on belt
pads (8).
• Undo the belt buckle (9) by pressing the red button firmly.
NOTE! Ensure that shoulder belts (6) are not twisted.
• Put your child into the car seat.
• Place shoulder belts (6) directly over your child's shoulders.
• Place both buckle tongues (10) together and lock them in place
in belt buckle (9) with an audible "CLICK".
• Pull cautiously on central adjustment belt (11) in order to tighten
shoulder belts (6) until they fit your child's body.
NOTE! For the car seat to offer optimum protection, shoulder belts
(6) should fit the body as closely as possible.

ALLACCIARE CON IL SISTEMA DI CINTURE

NOTA BENE! Verificare che il poggiatesta sia bloccato
correttamente in posizione prima di utilizzare il seggiolino.
NOTA BENE! Verificare che il seggiolino sia libero da giocattoli o
altri oggetti rigidi.
• Allentare le cinture (6) premendo il pulsante di regolazione
centrale (7) e tirare simultaneamente entrambe le cinture verso
l'alto.
NOTA BENE! Tirare sempre agendo sulle cinture(6) non sui
cuscinetti (8).
• Slacciare le cinture (6) premendo con forza il pulsante rosso.
NOTA BENE! Assicuratevi che le cinture (6) non siano invertite o
attorcigliate.
• Collocare il bambino nel seggiolino.
• Appoggiare le cinture (6) direttamente sopra le spalle del
bambino.
• Unire tra loro le due linguette (10) ed inserirle nella fibbia centrale
(9) dove si fissano con un sonoro "CLICK".
• Tirare delicatamente la cintura di regolazione centrale (11) per
stringere le cinture (6) fino a farle aderire perfettamente al corpo
del bambino.
NOTA BENE! Per garantire la massima protezione le cinture per le
spalle (6) devono aderire il più possibile al corpo del bambino.
21

Quicklinks ausblenden:

Werbung

loading