Program Setting - Gram BAKER GA 930 Bedienungsanleitung

Display mode during operation:
The display mode during operation depends on the choice of programme:
Chilling: The display alternates between the current cabinet temperature, followed by
a "C", and the remaining process time. The chilling indicator LED lights up.
Storage: The current cabinet temperature followed by a "C" is displayed. The storage
indicator LED lights up.
Retarding: The display alternates between the current cabinet temperature, followed
by a "C", and the relative humidity followed by an "F". The retarding indicator LED
lights up.
Proving: The display alternates between the current cabinet temperature, followed by
a "C", and the relative humidity followed by an "F". The proving indicator LED lights
up.

Program setting

Setting program parameters
When the cabinet is in stand-by mode, pressing
programs shown on the display: Pr1, Pr2, Pr3, Pr4 and Pr5.
The various settings for the selected program can be accessed by repeatedly
pressing P.
The setting for any selected parameter can be altered by pressing
again to continue scrolling through the program parameters. When altered, settings
are automatically saved.
Program parameters:
Display indication Range
Pr1 Pr 1 to Pr 5
-25 °C to +5 °C
-15C Cool
3.00 Cool 0.00 - 9.00 hrs./min.
-25 °C to +5 °C
-10C Stor
-5 °C to +9 °C
2C rEtA
75F rEtA 40 to 98 % RH
6.00 rEtA 1.00 to 10.00 hrs./min.
+10 °C to +40 °C
30C Pro
75C Pro 40 to 98 % RH
3.00 Pro 1.00 to 10.00 hrs./min.
Mon End Monday to Sunday
3.30 End 0.00 to 23.50
765041282
+ –
or toggles between the 5
LED indication Description
- Programme selection.
Chilling Temperature setpoint
Chilling Chilling time
Storage Temperature setpoint
Retarding Temperature setpoint
Retarding Relative humidity setpoint
Retarding Retarding time setting
Proving Temperature setpoint
Proving Relative humidity setpoint
Proving Proving time setting
- Process end day
- Process end time
+ –
or . Press P
23