Setting Room Temperature - Gram PRIMA-BOX GM1 Bedienungsanleitung

6) SET/ESC key: Pressed for 3 seconds, the led is lit and setting of required
room temperature is enabled. During programming it is used to pass from a
sub menu to an upper one.
7) DOWN/ ROOM LIGHT key: During programming mode or setting of room
temperature it serves to reduce the displayed value. At other times it serves
to control the room light.
8) Defrost/UP key: By pressing for more than 4 seconds it activates a manual
defrost. During programming mode or setting of room temperature it serves
to increase the displayed value.
9) ON/OFF key: To turn ON or OFF the unit hold pressed for more than 3
seconds.
10) ENTER key: Permits access to programming menu and passage to the
sub menu. It is advisable not to enter programming mode except in case
of necessity and in the presence of a qualified technician.

SETTING ROOM TEMPERATURE

Programming room temperature:
- Connect unit to mains power. The display reads OFF.
To set the desired room temperature press the SET ( 6 ) key for more than 3 seconds. The
green led will light and the previous set temperature will be displayed. To change the value
press:
(8) to increase temperature
(7) to decrease temperature
Press the SET key or wait 5 seconds to return to the actual room temperature.
The following table shows the factory set limits to room temperature settings.
M range (Media temperatura)
B range (Bassa temperatura)
76-504-0914
Min. value Max. value
-5°C
-25°
+10°
-15°C
19