Chilling And Storage - Gram BAKER GA 930 Bedienungsanleitung

Starting and stopping the program
The various steps in a control program can be started manually and used individually.
In other words, the cabinet can be used for storage, thawing or proving indefinitely.
With correct programming, some of the programs can be combined. The following
combinations are possible:
• Chilling followed by indefinite storage.
• Chilling followed by storage and then indefinite defrosting.
• Complete program with chilling, storage, thawing and indefinite proving.
Example:

Chilling and storage

A program comprising rapid freezing followed by storage is required.
• Press
+ –
or
• When the required program is displayed, press P once.
• The green chilling lamp lights up. "ChiL" and the temperature setting are
shown in turn in the display.
• Press
+ –
or
• Press
+ –
or
• When the required program is displayed, press P once.
• The green chilling lamp lights up. "ChiL" and the temperature setting are
shown in turn in the display.
• Press
+ –
or
• Again, press P once.
• "ChiL" and the chilling time are now shown in turn in the display.
• Press
+ –
or
• Again, press P once.
• The display now shows the text "Stor" and the storage temperature setting in
turn.
• Press
+ –
or
• Press P repeatedly until the first green lamp lights up again.
• Press S until "Strt" is shown in the display and then release it.
• Stop the program again by pressing P for 3 seconds.
765041282
. The display shows Pr1, Pr2, Pr3, Pr4 and Pr5 in turn.
until the required chilling temperature is shown in the display.
. The display shows Pr1, Pr2, Pr3, Pr4 and Pr5 in turn.
until the required chilling temperature is shown in the display.
to set the required chilling time.
to set the required storage temperature.
24