Cleaning The Mattress - Stryker Prime Series Stretcher Bedienungsanleitung

English
Cleaning the product using a cart washer (Continued)
EN
• Raise and lower the product
• Lock and unlock the brake/steer pedal in both positions
• Latch and unlatch the siderails
• Raise and lower the Fowler backrest
• Raise and lower the gatch
• Make sure all components have proper lubrication
• Make sure all labels are intact
Notes
• Do not steam clean the product.
• Some cleaning agents are corrosive in nature and may cause damage to the product if you use them
improperly. If you do not rinse and dry the product well, a corrosive residue may be left on the surface of the
product that could cause premature corrosion of critical components. Failure to follow these cleaning
instructions may void your warranty.

Cleaning the mattress

WARNING
• Do not clean, service, or perform maintenance while the product is in use.
• Do not immerse the mattress in cleaning or disinfectant solutions. Excess moisture could cause product
malfunction that results in product damage or patient injury.
• Do not allow fluid to pool on the mattress. Fluids can cause corrosion of components and may cause the safety and
performance of this product to become unpredictable.
• Always inspect mattress covers for tears, punctures, excessive wear, and misaligned zippers every time you clean
the covers. Remove and replace a damaged mattress immediately to prevent cross-contamination.
• Do not steam clean, pressure wash, hose off, or ultrasonically clean mattresses. These methods of cleaning may
void this product's warranty.
The life of the mattress can be affected by an increase in frequency of usage which might include more frequent
cleaning and disinfection.
1. Use a clean, soft cloth to wipe down the entire mattress with a mild soap and water solution to remove foreign
material.
2. Wipe down the mattress with a clean, dry cloth to remove any excess liquid or cleaning agents.
3. Rinse and dry covers after cleaning.
4. Disinfect as needed with a hospital grade disinfectant after cleaning has been completed
on page 1-52).
5. Check functionality before you return the product to service.
• Raise and lower the product
• Lock and unlock the brake/steer pedal in both positions
• Latch and unlatch the siderails
• Raise and lower the Fowler backrest
• Raise and lower the gatch
• Make sure all components have proper lubrication
• Make sure all labels are intact
Notes
• Do not iron, dry-clean, or tumble dry the mattress, as this will cause malfunction and damage the product.
• The mattress cover must be completely dry before you store, add linens, or place a patient on the mattress to
prevent impairment of the product performance.
1-50
Cleaning
1115-409-005 REV E
(Disinfecting the mattress
www.stryker.com