Inserting Or Removing X-Ray Cassettes - Prime X Option - Stryker Prime Series Stretcher Bedienungsanleitung

Positioning the lateral X-ray cassette holder - Prime X option (Continued)
WARNING (CONTINUED)
• Always follow the Positioning the lateral X-ray cassette holder - Prime X option instructions to insert the X-ray
cassette.
To position the lateral X-ray cassette holder:
1. Apply the brakes. Push on the product to make sure that the brakes are working.
A
2. Press down on the yellow release button (A) to open the lateral cassette holder
3. Slide the flat base (B) between the mattress and the patient platform.
4. Position the lateral cassette holder in the desired location.
5. Place the X-ray cassette in the cassette canal (C).
6. Pull up on the cassette hook (D) to adjust the height of the arm to fit over the X-ray cassette to hold the cassette in
place.
7. Reverse steps to remove the cassette and stow the lateral cassette holder.

Inserting or removing X-ray cassettes - Prime X option

WARNING
• Always refer to local, state, and federal guidelines in addition to facility protocols for safety before you use Prime X
option with radiation generating devices. Radiation generating devices may produce residual, stray, or scattered
radiation.
• Always use caution when you take X-rays with the Fowler backrest in the upright position or when you use a lateral
cassette.
Prime X option provides both an articulating radiographic support surface and a platform below the patient support
surface for X-ray cassette placement. Working with medical X-ray systems, the radiographic support surface allows the
www.stryker.com
Accessories
B
C
Figure 1-24: Lateral X-ray cassette holder
1115-409-005 REV E
D
B
C
(Figure 1-24 on page
English
EN
1-47).
1-47