Remove Iodine; Special Instructions - Stryker Prime Series Stretcher Bedienungsanleitung

Cleaning the mattress (Continued)
• Avoid over-exposure to alcohol or hydrogen peroxide. The cover material will swell.
• Do not allow liquid to seep into the zipper area and watershed cover barrier. Fluids allowed to come in contact
with the zipper may leak into the mattress which could impair the product performance.

Remove iodine

1. Make a solution of 1 to 2 tablespoons of sodium thiosulfate in a pint of warm water. Use the solution to wipe down
the stained area.
2. Clean the stain as soon as possible after the stain occurs.
3. If stains are not immediately removed, allow solution to soak or stand on the mattress before you wipe the mattress.
4. Rinse the mattresses which have been exposed to the solution with clear water before you return the mattresses to
service.
Note: Failure to follow these directions when you use these types of cleaners may void this product's warranty.

Special instructions

Velcro®
Solids or stains
Hard-to-clean spots
Laundering
www.stryker.com
Cleaning
Saturate with disinfectant, rinse with water, and allow the
solution to evaporate.
Use neutral soaps and warm water. Do not use harsh
cleansers, solvents, or abrasive cleaners.
Use standard household cleansers or vinyl cleansers and
a soft bristle brush on troublesome spots or stains. Pre-
soak dried-on soil.
Laundering is not recommended. Laundering may
substantially decrease the useful life of the mattress.
1115-409-005 REV E
English
EN
1-51