Replacing The External Fan - Fronius Symo 10.0-3-M Serviceanleitung, Ersatzteilliste

Replacing the ex- Removing the external fan:
ternal fan
144
(1)
(2)
(2) (3)
WARNING!
Observe the safety rules (see the begin-
ning of the "Safety" section)
Take the inverter out of the wall bra-
1
cket and open it (see "Opening and
closing the device")
Unplug the fan cable (1) from the Sym-
2
oFIL / EcoFIL
NOTE!
Turn the inverter carefully so that the
back of the inverter is accessible.
Pull off the two rubber seals (2)
3
Take the fan cable out of both strain-
4
relief devices
Pull off the cable gland (3)
5
Thread out the fan cable
6