Fronius Symo 10.0-3-M Serviceanleitung, Ersatzteilliste Seite 154

154
(3) (2)
(1) (1)
Connect the broken off device data unit
2
(3) to the inside of the new Recerbo
Fit the Recerbo holder (2) to the new
3
Recerbo
- feed it in from above
- press downwards
NOTE!
All guide bolts and pins must be proper-
ly engaged
Insert the new Recerbo module
4
The Recerbo holder locking devices
5
(1) must be fully engaged in the
housing shell
Reconnect all connections to the
6
Recerbo
Insert the Datamanager card, close the
7
inverter and place it in the mounting
bracket (see "Replacing the Datama-
nager card" and "Opening and closing
the device" sections)